Skip to main content

Step 1: Return Thermostat to WiFi Configuration Mode#

Sometimes it might be necessary to move the wireless internet accessible thermostat to a different wireless internet access network, change your network name or change your network password.

To do this, you will need to disconnect your Peak Partners thermostat for your wireless Internet network as follows:

On the Main Menu screen,

1 - Press the Menu button

2 - Press the Other button

3 - The thermostat will display the WIFI SETTINGS menu. Press the Select button.

4 - Press the Next button

5 - The top line of the message area will flash CLIENT. Press the + button to advance the display to RESET WIFI.

6 - As RESET WIFI is flashing, press the Select button.


Did You Know?

Replacing some bluegrass with low water-using planting beds can save water and money.

You can save water by partially fill the sink with warm water to rinse the razor blade when shaving.

When it rains and as snow melts, runoff carries pollutants such as oil, antifreeze and gas down storm drains, contaminating our rivers, streams and lakes. Don't drip and drive.